Tag: bathroom renovation

How to Install a Shower Room: Step-by-Step Guide

Shower rooms are a exceptionally imperative portion of a house, so their redesign and plan must be dealt with with uncommon care.

How to introduce a shower room as a whole?

  1. To begin with, check out the comparing space in the lavatory and decide the area for the shower room establishment. Amid the remodel, it is essential to clarify the conveyance of water lines and how to make holes.


  2. Begin by collecting the base in the decided area. If there is water drainage from the base, it demonstrates that it is introduced at an point. After establishment, check whether the base is level.
  3. Conduct a waterproof test on the wrapped up base. If there are issues like spillage or blocked waste, they require to be redressed some time recently continuing to the another step.


  4. Since the shower entryway is a sliding entryway, introduce the track after the base’s waterproof review is qualified. The lower track ought to be set in the center of the stone base.
  5. Another, collect the aluminum combination outline. To begin with, embed the side materials into the upper and lower tracks and secure them with screws. Introduce the aluminum fabric that is near to the divider on both sides, put the gathered shower room outline in the center of the stone base, and alter its level. At that point bore gaps in the adjacent aluminum materials and utilize fixing screws to secure the aluminum amalgam outline to the stone base.


  6. Utilize screws to settle the settled plates on both sides of the back of the base and the shower screen.
  7. Embed fixing strips into the holes between the glass and the outline so that the glass can be clamped more securely.
  8. After securing everything, introduce the handle for the sliding entryway, join the best cover, and utilize silicone sealant to seal the edges.
  9. Interface the hot and cold water channels, at that point test the water to guarantee typical supply.


  10. After interfacing the seepage pipe, embed it into the pipe, and seal the encompassing range with silicone sealant. Perform a waterproof test once more; if there are no spills or blockages, the establishment is complete.

In summary：the over are the establishment steps for a shower room. From the article, we can see that amid the genuine operation, it is vital to entirely take after the arrangement. This guarantees that the quality of the work meets the measures, decreases the likelihood of revamp, and spares more time and exertion. I trust this makes a difference everybody.

Strategies for Enhancing Slip Resistance in Bathroom Floors During Renovation

When individuals redesign their lavatories, they not as it were pay consideration to the partition of damp and dry ranges but too to slip resistance. So, what strategies can be utilized for slip resistance on the shower room floor? What ought to be famous amid the remodel of the shower room? Let’s take a see!

Methods for accomplishing slip resistance on the shower room floor:

Firstly, you can lay stone stones, which are not as it were cost-effective but too offer great slip resistance and can give a foot rub impact. Besides, you can groove the floor tiles or select slip-resistant ceramic tiles for establishment. In conclusion, you may consider utilizing slip-resistant mats or selecting anti-corrosion wood that is both waterproof and slip-resistant.

Things to pay consideration to when redesigning the shower room:

  1. Wiring some time recently shower room renovation


Firstly, the establishment of the shower room ought to not be subjective. Some time recently redesign, a sensible format ought to be arranged, and the switch courses of action ought to be done appropriately to maintain a strategic distance from the hazard of electric spillage. The position of the shower room ought to moreover be decided; if it’s not reasonable, alterations ought to be made to maintain a strategic distance from squandering space and causing bother amid use.

  1. Deciding the measure of the shower room


Next, when introducing the shower room, you require to consider the zone of the lavatory and the establishment tallness. If the shower room is as well expansive or the establishment tallness is as well tall, it may make an awkward feeling. The ordinary stature of the shower room is around 2.1 meters, but amid real operations, it may require to be expanded by roughly 10 centimeters, and a water boundary ought to be pre-set.

  1. Choice of shower room glass

When remodeling the shower room, consideration ought to moreover be paid to the glass and other fittings. A few may accept that thicker glass is continuously superior, but in reality, a turning shower room has bigger glass zones however destitute steadiness. Hence, it’s fundamental to select thicker glass, ideally over 5 millimeters for tempered glass. For fan-shaped and square shower rooms, glass thickness of 5 millimeters is sufficient.

  1. Anticipating spillage in the shower room

Finally, consideration ought to be given to the issue of water spillage in the washroom amid the redesign of the shower room. Since lavatories utilize a part of water, it’s critical to routinely check for signs of spillage when introducing the shower room and instantly address any issues to dodge future complications.

In summary：the over is an presentation to strategies for accomplishing slip resistance on shower room floors and focuses to consider when remodeling a shower room. I trust this data makes a difference those in require. If you require more related information in the future, feel free to take after our site.

Can You Change the Shower Area After Bathroom Renovation?

When redesigning a lavatory, it’s by and large vital to to begin with decide the shower area some time recently introducing other washroom installations. So, can you alter the shower area after the lavatory has as of now been redesigned? Let’s take a look.

Can you alter the shower area after the washroom has been renovated?

Yes, it is conceivable, but it can be very complicated. Some time recently making any changes, it is basic to clearly recognize the unused craved area. When the shower area is changed, the seepage pipe position too needs to be balanced. If the unused shower area is as well distant from the seepage pipe, it may lead to waste issues, causing water to gather on the floor and contrarily affecting consolation in the bathroom.

What points of interest ought to be famous when redesigning a bathroom?

  1. Guarantee legitimate moisture-proofing for the ceiling

The washroom is a space that is as often as possible uncovered to water vapor amid washing and showering, so it’s imperative to anticipate dampness and shape. It is suggested to take moisture-proof measures for the ceiling. Amid the development stage, apply a layer of water glass to the ceiling and at that point introduce a PVC ceiling board with great waterproofing properties. The PVC board can be introduced on a system, which will too conceal the channels, making the washroom ceiling see more tastefully pleasing.

  1. Guarantee a legitimate waterproof layer

When a modern house is given over to the proprietor, there is ordinarily a waterproofing treatment in put in the washroom. In any case, exercises such as laying floor tiles, leveling the ground, and electrical establishments amid the remodeling can harm the unique waterproof layer. In this manner, it is prudent to re-try the waterproofing amid the lavatory remodel. After the waterproofing is completed, a water-retention test ought to be conducted. As it were after passing the test will the chance of spillage in the washroom be reduced.

  1. Assess the waterproofing for quality

When conducting a waterproof test, the perception period ought to final for more than 24 hours. On the off chance that, amid the test period, there is no critical decay in the water level on the floor and no signs of spillage show up on the ceiling of the unit underneath, at that point the waterproof test is considered fruitful. If the water level drops essentially or spillage is identified, encourage waterproofing work ought to be carried out. As it were after affirming that the waterproof layer is intaglio can floor tiles be installed.

In summary：This is a point by point diagram with respect to whether it is conceivable to alter the shower area after redesign and what subtle elements to pay consideration to when redesigning a lavatory. I trust this data is supportive to everybody. If you need to learn more related information, feel free to proceed taking after our site, as I will bring you more energizing substance in the future.