The establishment of a showerhead isn’t difficult, but there are numerous detail-oriented issues to consider to ensure proper use in the future. Why is the dividing of the showerhead set at 15 cm?
The main reasons for the 15 cm dividing of the showerhead are as follows:
- Easy to utilize
Generally, the family water channels are made of stable, low-cost, and long-lasting plastic materials. Maintaining a security separate of 15 cm for showerhead dispersing helps avoid interference with daily use.
- Facilitates upkeep
Plastic water channels tend to grow in high-temperature environments. Therefore, hot and cold water channels should not be put together. Otherwise, the two channels can influence each other, remaining in a state of expansion for a long time, and even causing tiles to crack.
- Convenient establishment
The dividing between the cold and hot water outlets on market-standard mixing valves is for the most part 15 cm. Since numerous showerheads and faucets are connected to mixing valves, it is essential to preserve this 15 cm dispersing between the pipes, with an admissible error of no more than 5 mm. Otherwise, installation may be affected.
What to pay attention to when introducing a showerhead:
- Determine the height of the showerhead
When deciding the showerhead height, professionals will test on-site to find the most appropriate height for future use.
- Confirm the distance and temperature of hot and cold water
The distance between the center holes for hot and cold water in commonly used showerheads is usually 0.15 m, which includes two S connectors. This distance can be adjusted, but the error must not exceed 0.10 m. - Protect the equipment such as fixtures
When fixing the faucet, carefully wrap a thick cloth around the faucet nut to prevent the torque from damaging the faucet.
- Clean up after establishment
Cleanliness is unavoidable during the establishment process, so it’s fundamental to clean up after completing the work, especially since newly repaired channels can contain many impurities. If the channels aren’t cleaned, it may disable drainage efficiency. Ensure the area is clean so that water continues to flow smoothly.
In summary, this is an explanation of why the showerhead dividing is set at 15 cm. I trust everybody understands that installing a showerhead requires attention to detail to ensure proper use in the future.